Building Base/ Cant place Walls windows Doors

Home Forums Bugs Building Base/ Cant place Walls windows Doors

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #2150
    luckynuts
    Participant

    Resources on High
    Forrest on Low
    everything else Normal

    Built first assembler then decoder, was trying to get a base up. Foundations went down smooth and snapped together great. Built a wall and then Window and Door. Cant place them? Am I using the correct wall? I made them in Foundation assembler ?

    Here is my screenshots…
    https://steamcommunity.com/profiles/76561197978983105/screenshots/

    thanks,
    Luckynuts

    #2151
    RaduRadu
    Creator

    You need to place down pillars before you can place down walls. It usually says in the description of the item if it needs something else to be built ^^

    #2635
    birdseye
    Participant

    I have had an issue with placing walls. Some walls will flash red/green when I can even get them to get in between the pillars, and I can then get them placed. One wall of my structure, however, would not go all the way to the pillars. It hovered about halfway between where interior pillars would be (if I had placed any) and where the exterior pillars were. So my structure has a door, walls, windows, and an open slot. I may start over and try to duplicate this behavior.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.